Drain Fly Infestation: The Hudson Apartments (Hillview Hollywood)
Since these flies often originate in unsanitary conditions, there is the possibility of disease transmission that can affect human health.
Drain flies (also known as “moth flies” or “filter flies”) are a common nuisance in/around homes and commercial buildings, including sewage treatment plants. Adult flies may become so numerous indoors that they congregate at windows, around light fixtures, and around showers, bathtubs, sinks and floor drains. They can annoy people sitting indoors or outdoors. Since these flies often originate in unsanitary conditions, there is the possibility of disease transmission that can affect human health.
Adult drain flies are small (1/6 to 1/5 inch long), fuzzy, dark colored insects with the body and wings densely covered with hairs. Their wings appear large for their body, are held roof-like over the body when at rest, giving them a mothlike appearance. They are weak fliers and fly only a few feet at a time. Larvae are legless, about 3/8 inch long, wormlike and gray, with both ends somewhat darker.
Drain flies breed in polluted, shallow water or highly moist organic solids. You will find the eggs, larvae and pupae in the muck, slime, or gelatinous film often accumulating on the sides of drains and condensate pipes for air conditioners, in the sewage filtration tanks, septic tanks and moist compost. Other breeding sites include dirty garbage containers, rain barrels and tree holes or in low-lying areas adjacent to buildings where storm-water collects and algae or mold grows. The female flies deposit laid eggs in irregular masses of 10 to 200 directly in/on moist organic debris. These eggs usually hatch in less than 2 days and the larvae feed on the decaying organic matter, microorganisms, algae and sediment in the debris and mature in 9 to 15 days. Larvae pupate in/on the surface of this material and new adults emerge in 1 to 2 days.
The key to solving a drain fly problem is to find and eliminate the source, i.e., find the areas of excess moisture and a buildup of organic debris.
Outdoors - Areas that are likely to be a source of moth fly infestations outdoors include:
* Damaged or faulty septic lines
* Areas where rainwater tends to pool or where air conditioning condensate lines drain, particularly if the area is shaded and algae or mold is growing on the soil or foundation.
* For commercial buildings – check the area (usually a concrete or gravel covered) beneath air condition cooling units on roofs or adjoining the building.
If a local source of the flies cannot be found, it is possible that the flies are being carried on wind currents from a nearby sewage treatment plant or another faulty septic system.
Indoors - Floor drain Areas that are likely to be a source of moth fly infestations indoors include:
* Toilets (particularly if they are not used frequently). Be sure to check the toilet tank, as well.
* Sink and bathtub/shower drains
* Floor drains in commercial buildings and basements
* Condensate lines for icemakers
* Loose ceramic floor tiles where water may collect
One way to determine if the flies are coming from a particular drain is to cover the drains with glue boards (elevated on cardboard “collars” to keep them from sticking to the floor or drain. There is also a simple method that you can use at home. Take a translucent container (e.g., a margarine container) and coat the inside with a thin layer of petroleum jelly. Place the container upside down over the drain and leave it in place overnight or for a few days, but check it daily. Emerging flies should be trapped in the petroleum jelly. In commercial buildings, the source of the problem may be more difficult to identify. Pest control companies often use blacklight traps indoors to determine areas where the flies are most numerous and then proceed with a thorough inspection of the area.
The most effective method to correct (or to prevent) drain fly problems is to clean toilets, drainpipes and traps to eliminate any gelatinous rotting, organic matter, thereby eliminating the larval food source. Many of the commercially-available drain and toilet bowl cleaners can be used for this purpose. Many of these cleaners are biodegradable and pose less of a hazard to the environment. If you have a septic system, read the product labels carefully to make sure that the product is compatible with the system (i.e., will not disrupt the microbial action in the septic tank). Routine cleaning of floor and sink drains is important particularly in commercial establishments.
Alternative methods include cleaning pipes and traps with a good, stiff, long-handled brush. It is best to remove the drain trap and use a plumber’s “snake” in clogged drains to dislodge the gelatinous material in the drains. If you use mechanical cleaning methods, you should also flush the lines with boiling water and bleach to remove any material left behind. Caustic drain cleaners may also be used, although they are not necessarily as effective as other cleaning methods. IMPORTANT: NEVER rinse a drain with bleach after using a caustic drain cleaner. Mixing of these two chemicals in the drain line may produce chlorine gas, which is extremely hazardous to anyone who inhales it.
Indoors, aerosol sprays of pyrethrins (or other “flying insect” sprays) will kill adult drain flies, giving temporary control, but they are not a real fix for the problem. If the drain flies are coming from an outdoor source, exterior applications of any common residual sprays for flies can be made around windows for temporary relief until the source of the infestation can be found and eliminated. Examples of such pesticides can be found in the NC Agricultural Chemicals Manual .The insect growth regulator methoprene (Strike®) is registered for use in municipal wastewater treatment facilties to control midges and drain (filter) flies. Always read the label and follow directions and safety precautions.